1. One of the methods of producing titanium steel composite plate is hot rolling, including the formation of an iron base material and
titanium cladding material, the coating has at least one cladding surface edge plate assembly, and the coating material of the base material and 20 to 30 g/m
2 molybdenum or vanadium. It is heated at the temperature of the melting point, oxidized between 50 degrees Celsius and 1050 degrees Celsius to reduce the titanium oxide, and then hot rolled.
2. The oxide that needs to be added is MoO
3.
3. Heating temperature between 845 degrees Celsius and 1050 degrees Celsius.
4. Need to add oxide V
2O
5.
5. The heating temperature is between 740 degrees Celsius and 1050 degrees Celsius.
This technology is actually a process of producing titanium steel composite plate from titanium by hot rolling method, which has good cladding characteristics and economical production cost. In the process of stainless steel clad plate production, hot rolling is more popular and suitable for mass production. However, this is not suitable for the production of titanium steel composite plates. This is because titanium is easy to react, at high temperatures, with air, or other metals may have chemical reactions, so the properties of titanium make it need to be covered in hot rolling. Good encapsulation is difficult to achieve. Therefore, when titanium steel composite plates are produced by hot rolling, other materials need to be added between titanium and the base material to prevent the formation of compounds at the boundary between titanium and iron. And these materials, preferably metal, so that the titanium and iron problems can be solved. These metals are precious, so titanium steel composite plates are also expensive.
